The RU-NMP44 is a network mixing processor containing six virtual audio mixers controlled by network commands from RDL and other network remote controls. Each mixer operates independently with input signal attenuation from unity to off. The output level from each mixer is independently adjustable from unity to off. Based on the commands sent to the RU-NMP44, each mixer can be used as a mixer, a source selector, a priority paging inserter and/or as a volume control. The outputs from four of the mixers drive corresponding network audio channels. The outputs from two of the mixers drive line-level +4 dBu audio outputs. The RU-NMP44 is configured using RDL CONSOLE or other network control software.
If ducking is used, one of the four network audio inputs is assigned as the priority input. That input is connected to all six virtual mixers. An audio detector with installer-defined threshold and recovery delay may be assigned to one, several, or all of the six mixers. For each of those mixers, the priority input is set to a defined level, and the remaining three inputs are each set to attenuate to a fixed level between -10 and -64 dB when a message is detected on the priority input. If hum is anticipated from the paging source, one of four high-pass filter may be enabled.
Up to four preset configurations may be stored in the RU-NMP44. Each preset can define any or all mixer level settings. A preset is activated by a network command, an RDL network or wired remote control, a momentary switch closure or a compatible open-collector from other equipment. The RU-NMP44 may be configured to power up to a preset, to the last settings used, or with all levels “off”.
The RU-NMP44 may be powered from an external 24 Vdc power supply, available separately. The RU-NMP44 is equipped to operate from a PoE enabled network switch. The RU-NMP44 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-NMP44, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.
The RU-NMP44 is ideal for adding volume control, mixing, switching and ducking to existing network audio systems. The digital signal processing offered in the RU-NMP44 often fulfills all the requirements for an audio system design, such as in classrooms, meeting rooms, restaurants/bars, fitness gyms and retail stores. The RU-NMP44’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems.
The RU-NMP44 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.
A graduate of DeVry Institute of Technology, Doug has been in the Technology industry since 1976 and actively oversees Fearing’s daily operations. Along with his wife, Lois, and three others, Doug started Fearing’s in a 600 square-foot facility in Portage, Wisconsin. In the 25 years since, the company has grown to over 30 employees with offices in Madison and Milwaukee, Wisconsin. Doug likes to say he’s a “TV Technician with a dream� going back to his history with the family’s original business-Fearing’s TV and Appliance.
Doug values time with family, watersports, hiking, snowshoeing and skiing. In addition to being a devoted member of his church, Doug serves as Board President for Kinship Mentoring of Columbia County, Board member of Schools for Haiti and Scripture Chair of the Gideons-Portage camp.
A graduate of MATC, Lois oversees Fearing’s daily book keeping along with various HR responsibilities.
Along with Doug, Lois is deeply connected to community outreach, serving as a Board member and Fundraising Committee Chairperson for Kinship Mentoring of Columbia County. She also serves on the Schools for Haiti Fundraising committee. In addition, Lois’ ongoing passion and commitment to provide care for the elderly comes from her 10-year history of working in a Reedsburg, Wisconsin Nursing home.
Lois enjoys singing, hiking, sunny days on the pontoon, and spending time with her 4 grandchildren.
Ehren drives Fearing’s technology by continually seeking out trends to enhance capabilities while supporting Sales, Engineering and Installation teams. Throughout his years with Fearing’s, Ehren’s talent and vision have joined forces to create a wide variety of projects and strategic solutions that exceed expectation.
Ehren loves music, family time, movies, nature, sustainability efforts and electric vehicles.
With 10 years with Fearing’s and over twice that long in the industry, Ben continues to lead, coordinate, and develop the Commercial AV team.
By consistently delivering an outstanding experience and outcome, Ben contributes to the Fearing’s legacy of long-lasting partnerships that truly make a difference. Whatever the Commercial AV need may be, Ben and team deliver at the highest level.
Ben is an avid fisherman and photographer. He enjoys coaching his sons and other youth.
Chris has been with Fearing’s for 20 years and in the industry for over 2 decades. As a Certified leader in Sales Acceleration and trained in EOS (Entrepreneurial Operating Systems), Chris successfully utilizes his skills to lead the Fearing’s Salesforce. Chris and team are motivated and driven to develop new client partnerships while continuing to reinforce loyal long-term relationships with ongoing Service excellence.
Married for 19 years with 3 children, Chris enjoys skiing, hiking, fishing, boating, hunting, camping and golf. He’s also been actively involved as a Youth Football and Softball coach for his family and others.
