Pro AV Catalog
Radio Design Labs - DS-BT1A
Request Quote
All Products

LED Status Indication Wall-mounted Bluetooth Audio Format-A Interface

Series: D

Model: DS-BT1A

  • Bluetooth audio input for installed sound system
  • Intuitive single button pairing with led status indication
  • Special software not required for module setup
  • Customize the module id name and programming password through the bluetooth connection
  • Sends received bluetooth audio to rdl format-a receivers
Compare
Project List
Product Info
Related Products
Accessories

The D SERIES-BT1A modules are Bluetooth audio receiving modules compatible with RDL® Format-A twisted pair receivers. When paired with a compatible Bluetooth enabled devices, the module receives stereo audio from the Bluetooth source. The stereo signal is sent through two Format-A pairs to any RDL Format-A receiver. A stereo/mono switch set by the installer permits summed mono audio to be sent over one switch-selected pair to the Format-A receiver.

If set for stereo operation, an additional Format-A source (set to Pair A) may be daisy chained with the D SERIES-BT1A to a three-pair Format-A receiver. If set for mono operation, up to three D SERIES-BT1A modules may be daisy chained to a single three-pair Format-A receiver. Connections between Format-A modules and Format-A receivers use standard CATx cable with RJ45 connectors.

The D SERIES-BT1A modules are powered from the Format-A receiver. The installer can customize the module name and programming password through the Bluetooth connection using a smartphone, computer or tablet terminal program. These modules feature studio-quality circuits and analog filters to provide audio performance exceeding expectations from consumer interface technologies. High performance, simplicity of operation and efficiency of installation make RDL the best value in professional Bluetooth interfaces.

  • Bluetooth audio input for installed sound system
  • Intuitive single button pairing with led status indication
  • Special software not required for module setup
  • Customize the module id name and programming password through the bluetooth connection
  • Sends received bluetooth audio to rdl format-a receivers
  • Mono summed or stereo audio input mode is switch-selectable on rear panel
  • Rear-panel switch selects which RJ45 pair (A, B or C) is fed in mono summed mode
  • Daisy-chain up to three D SERIES-BT1A modules to one Format-A receiver in mono mode
  • Remotely powered through twisted pair cable
  • Signal and power pair pass-through on RJ45 jacks
 
Request Quote
 

Suggested Products

Douglas Fearing- Co-Founder / President

A graduate of DeVry Institute of Technology, Doug has been in the Technology industry since 1976 and actively oversees Fearing’s daily operations. Along with his wife, Lois, and three others, Doug started Fearing’s in a 600 square-foot facility in Portage, Wisconsin. In the 25 years since, the company has grown to over 30 employees with offices in Madison and Milwaukee, Wisconsin. Doug likes to say he’s a “TV Technician with a dream� going back to his history with the family’s original business-Fearing’s TV and Appliance.

Doug values time with family, watersports, hiking, snowshoeing and skiing. In addition to being a devoted member of his church, Doug serves as Board President for Kinship Mentoring of Columbia County, Board member of Schools for Haiti and Scripture Chair of the Gideons-Portage camp.

Lois Fearing- Co-Founder/Accounting, Human Resources

A graduate of MATC, Lois oversees Fearing’s daily book keeping along with various HR responsibilities.

Along with Doug, Lois is deeply connected to community outreach, serving as a Board member and Fundraising Committee Chairperson for Kinship Mentoring of Columbia County. She also serves on the Schools for Haiti Fundraising committee. In addition, Lois’ ongoing passion and commitment to provide care for the elderly comes from her 10-year history of working in a Reedsburg, Wisconsin Nursing home.

Lois enjoys singing, hiking, sunny days on the pontoon, and spending time with her 4 grandchildren.

Ehren Tresner-VP of Technology and Innovation

Ehren drives Fearing’s technology by continually seeking out trends to enhance capabilities while supporting Sales, Engineering and Installation teams. Throughout his years with Fearing’s, Ehren’s talent and vision have joined forces to create a wide variety of projects and strategic solutions that exceed expectation.

Ehren loves music, family time, movies, nature, sustainability efforts and electric vehicles.

Ben Voeck-Director of Commercial AV

With 10 years with Fearing’s and over twice that long in the industry, Ben continues to lead, coordinate, and develop the Commercial AV team.

By consistently delivering an outstanding experience and outcome, Ben contributes to the Fearing’s legacy of long-lasting partnerships that truly make a difference. Whatever the Commercial AV need may be, Ben and team deliver at the highest level.

Ben is an avid fisherman and photographer. He enjoys coaching his sons and other youth.

Chris Matson-Senior VP of Sales

Chris has been with Fearing’s for 20 years and in the industry for over 2 decades. As a Certified leader in Sales Acceleration and trained in EOS (Entrepreneurial Operating Systems), Chris successfully utilizes his skills to lead the Fearing’s Salesforce. Chris and team are motivated and driven to develop new client partnerships while continuing to reinforce loyal long-term relationships with ongoing Service excellence.

Married for 19 years with 3 children, Chris enjoys skiing, hiking, fishing, boating, hunting, camping and golf. He’s also been actively involved as a Youth Football and Softball coach for his family and others.