The new ICC1-IRX IR TV Controller delivers economical 1-way control for TV power, volume, and channels, receiving iCC-Net network commands over the same broadband coax that carries the CATV channels. Compact in size and price, the ICC1-IRX now features power current sensing using the optional CSM1 sensor from Xantech.
Manages channel access by changing the TV’s internal available channel list
Delivers absolute power control using the Xantech CSM1 power current sensor
Networks up to 4,000 TVs through the ICE-HE Ethernet Head-End
Receives 1-way individual and zone commands from a single RS-232 port on the HE
Operates over same RF coax cable as CATV channels
Exclusive SmartZone architecture controls hundreds of controllers with a single command
Low-loss internal RF tap saves amplification and installation costs
Provides LED feedback for network, IR control, and power status
Restores all power and channel status after loss of power from data stored in non-volatile memory
Mounts on the back of the TV for simplified control and RF installation
Operates with Contemporary Research Display Express software as well as from RS-232 protocol from a custom-programmed PC or control system
Senses power status from optional CSM1 power current sensor, or optional CC-HSD scan sensor for older tube TVs
Includes CC-IRE IR Emitter, RF loop cable, mounting Velcro, and 12VDC power supply (U.S. only)
ROHS Compliant - Yes
Systems Controlled - Displays
Warranty - Yes
Spec Sheet available - Yes
DC Voltage:
12 Volts
Physical:
Enclosure: All aluminum with durable black powder coat paint
Mounting: Mounts at rear of TV
Front Panel:
RF In: 'F', female, 75 ohm impedance, RF from CATV system, iCC-Net control
RF Out: ‘F', female, 75 ohm impedance, RF to TV, Low-loss internal tap - less than -1.5 dbmV loss
Net LED: Green LED for iC-Net bus and DC power, flashes once per second if active
IR Out: 3.5mm jack for CC-IRE IR Emitter cable or compatible CC-IRS serial cable, Supports carrier frequencies up to 62 KHz
IR Out LED: Red LED lights when sending IR commands
Power Sensor:
Tip+:3.5mm jack for included CC-HSD scan sensor or 5V logic-level input
CSM: 3.5mm jack of Zantech CSM1 Power Current Sensor
LED: Red LED lights when sensor indicates power on
Power In: 2.1mm coaxial jack (inside center conductor positive), 75 mA maximum, 11.5 to 16.5 VDC, 12 VDC typical (may be unregulated)
DIP Switches S1 and S2: Located on bottom of unit, sets IR code operation and device number
ICC-Net:
Operation: 1-way control, carried over the same RF coax connection as TV channels
Data Receive: Mid-band VHF, 74.7MHz, sent from IC Head-End Network Controller , -25 to +35 dBmV signal level
CC-HSD Scan Sensor:
Range: Senses presence of TV scanning, from 15-35 KHz, magnetic pick-up
Includes: 3.5mm plug, 4ft. cable, stick-on TV sensor
Includes:
Space-saving 12 VDC 500 mA digital switching power supply (North American shipments only
CC-IRE IR Emitter
A graduate of DeVry Institute of Technology, Doug has been in the Technology industry since 1976 and actively oversees Fearing’s daily operations. Along with his wife, Lois, and three others, Doug started Fearing’s in a 600 square-foot facility in Portage, Wisconsin. In the 25 years since, the company has grown to over 30 employees with offices in Madison and Milwaukee, Wisconsin. Doug likes to say he’s a “TV Technician with a dream� going back to his history with the family’s original business-Fearing’s TV and Appliance.
Doug values time with family, watersports, hiking, snowshoeing and skiing. In addition to being a devoted member of his church, Doug serves as Board President for Kinship Mentoring of Columbia County, Board member of Schools for Haiti and Scripture Chair of the Gideons-Portage camp.
Lois Fearing- Co-Founder/Accounting, Human Resources
A graduate of MATC, Lois oversees Fearing’s daily book keeping along with various HR responsibilities.
Along with Doug, Lois is deeply connected to community outreach, serving as a Board member and Fundraising Committee Chairperson for Kinship Mentoring of Columbia County. She also serves on the Schools for Haiti Fundraising committee. In addition, Lois’ ongoing passion and commitment to provide care for the elderly comes from her 10-year history of working in a Reedsburg, Wisconsin Nursing home.
Lois enjoys singing, hiking, sunny days on the pontoon, and spending time with her 4 grandchildren.
Ehren Tresner-VP of Technology and Innovation
Ehren drives Fearing’s technology by continually seeking out trends to enhance capabilities while supporting Sales, Engineering and Installation teams. Throughout his years with Fearing’s, Ehren’s talent and vision have joined forces to create a wide variety of projects and strategic solutions that exceed expectation.
Ehren loves music, family time, movies, nature, sustainability efforts and electric vehicles.
Ben Voeck-Director of Commercial AV
With 10 years with Fearing’s and over twice that long in the industry, Ben continues to lead, coordinate, and develop the Commercial AV team.
By consistently delivering an outstanding experience and outcome, Ben contributes to the Fearing’s legacy of long-lasting partnerships that truly make a difference. Whatever the Commercial AV need may be, Ben and team deliver at the highest level.
Ben is an avid fisherman and photographer. He enjoys coaching his sons and other youth.
Chris Matson-Senior VP of Sales
Chris has been with Fearing’s for 20 years and in the industry for over 2 decades. As a Certified leader in Sales Acceleration and trained in EOS (Entrepreneurial Operating Systems), Chris successfully utilizes his skills to lead the Fearing’s Salesforce. Chris and team are motivated and driven to develop new client partnerships while continuing to reinforce loyal long-term relationships with ongoing Service excellence.
Married for 19 years with 3 children, Chris enjoys skiing, hiking, fishing, boating, hunting, camping and golf. He’s also been actively involved as a Youth Football and Softball coach for his family and others.