Pro AV Catalog
Audio Production Equipment : Amplifiers (Audio) : Bose Professional - PowerMatch PM4250N Amplifier (Network model)
Bose Professional - PowerMatch PM4250N Amplifier (Network model)
Request Quote
All Products

1000W/120V 4-channel PowerMatch Network Amplifier

Model: PowerMatch PM4250N Amplifier (Network model)

Part #: 361815-1110

  • QuadBridge™ Technology – Allows the 4 available channels to be configured as Mono, V-Bridge, I-Share or Quad mode
  • Bose® ControlSpace® Designer™ software – PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the onboard front panel USB connection, or the rear panel Ethernet connection (network models only)
  • Auto-Standby/Auto-Wake function – When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.
  • Dual voltage and current feedback loop – Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load.
  • PeakBank™ power supply – Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs.
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The amplifier contains all solid-state circuitry, using MOSFET output devices employing Class-D topology and a current and voltage feedback loop circuit. The amplifier shall incorporate a switch-mode power supply with fast-tracking power factor correction (PFC) that will allow full-rated power from AC outlets ranging from 100 - 240 V, 50/60 Hz. The amplifier shall have an IEC 60320-C14 10/15-amp electrical power inlet and shall be equipped with a removable power supply cord. The amplifier shall include protection from shorted and open loads, general overheating, DC, high-frequency overloads, under/over voltage and internal faults.

The Bose® PowerMatch PM4250 configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-equipped versions enable network configuration, control and monitoring, and an expansion slot supports input from optional digital audio accessory cards. PowerMatch amplifiers utilize numerous Bose technologies to deliver an unprecedented combination of performance, efficiency and ease of installation—all in a reliable, proprietary design.

  • QuadBridge™ Technology – Allows the 4 available channels to be configured as Mono, V-Bridge, I-Share or Quad mode
  • Bose® ControlSpace® Designer™ software – PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the onboard front panel USB connection, or the rear panel Ethernet connection (network models only)
  • Auto-Standby/Auto-Wake function – When enabled, this function automatically enters/exits Standby Mode, allowing the system to consume less power.
  • Dual voltage and current feedback loop – Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load.
  • PeakBank™ power supply – Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs.
  • Fast-tracking power factor correction (PFC) – Efficiently manages the current drawn from the AC mains, allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation.
  • Applications:
    • Houses of worship
    • Retail stores
    • Atriums and malls
    • Restaurants
    • Auxiliary zones
    • Conference centers
    • Hospitality venues
 
Request Quote
 

Suggested Products

Douglas Fearing- Co-Founder / President

A graduate of DeVry Institute of Technology, Doug has been in the Technology industry since 1976 and actively oversees Fearing’s daily operations. Along with his wife, Lois, and three others, Doug started Fearing’s in a 600 square-foot facility in Portage, Wisconsin. In the 25 years since, the company has grown to over 30 employees with offices in Madison and Milwaukee, Wisconsin. Doug likes to say he’s a “TV Technician with a dream� going back to his history with the family’s original business-Fearing’s TV and Appliance.

Doug values time with family, watersports, hiking, snowshoeing and skiing. In addition to being a devoted member of his church, Doug serves as Board President for Kinship Mentoring of Columbia County, Board member of Schools for Haiti and Scripture Chair of the Gideons-Portage camp.

Lois Fearing- Co-Founder/Accounting, Human Resources

A graduate of MATC, Lois oversees Fearing’s daily book keeping along with various HR responsibilities.

Along with Doug, Lois is deeply connected to community outreach, serving as a Board member and Fundraising Committee Chairperson for Kinship Mentoring of Columbia County. She also serves on the Schools for Haiti Fundraising committee. In addition, Lois’ ongoing passion and commitment to provide care for the elderly comes from her 10-year history of working in a Reedsburg, Wisconsin Nursing home.

Lois enjoys singing, hiking, sunny days on the pontoon, and spending time with her 4 grandchildren.

Ehren Tresner-VP of Technology and Innovation

Ehren drives Fearing’s technology by continually seeking out trends to enhance capabilities while supporting Sales, Engineering and Installation teams. Throughout his years with Fearing’s, Ehren’s talent and vision have joined forces to create a wide variety of projects and strategic solutions that exceed expectation.

Ehren loves music, family time, movies, nature, sustainability efforts and electric vehicles.

Ben Voeck-Director of Commercial AV

With 10 years with Fearing’s and over twice that long in the industry, Ben continues to lead, coordinate, and develop the Commercial AV team.

By consistently delivering an outstanding experience and outcome, Ben contributes to the Fearing’s legacy of long-lasting partnerships that truly make a difference. Whatever the Commercial AV need may be, Ben and team deliver at the highest level.

Ben is an avid fisherman and photographer. He enjoys coaching his sons and other youth.

Chris Matson-Senior VP of Sales

Chris has been with Fearing’s for 20 years and in the industry for over 2 decades. As a Certified leader in Sales Acceleration and trained in EOS (Entrepreneurial Operating Systems), Chris successfully utilizes his skills to lead the Fearing’s Salesforce. Chris and team are motivated and driven to develop new client partnerships while continuing to reinforce loyal long-term relationships with ongoing Service excellence.

Married for 19 years with 3 children, Chris enjoys skiing, hiking, fishing, boating, hunting, camping and golf. He’s also been actively involved as a Youth Football and Softball coach for his family and others.