The John F. Kennedy Jr. Forum is Harvard University’s premier arena for political speech, discussion, and debate. The student union-like space at the heart of the John F. Kennedy School of Government has played host to everyone from heads of state to community groups. “The space reconfigures itself practically by the hour,” says Darren Clark, a senior project engineer at HB Communications, which recently installed new AV equipment in the three-story, open structure. “The vast range of events held there demanded a system that would accommodate a considerable amount of flexibility.” The building was recently reopened after an extensive-and intensive-renovation project. The AV system was designed by national media firm MCSi and installed by engineers from HB’s Connecticut and Waltham, MA, offices.
“It’s a difficult space,” Clark says. “The mezzanines and various corners of the interior create some interesting challenges, both acoustically and visually.” The room can be repurposed using various modular stage and podium components, as well as movable drapes and partitions. “We had to look at all the potential configurations and come up with a set of solutions that would be as flexible as the architecture,” says Ed Hondzinski, HB’s project manager. “The task was made far easier using a DSP-based system.”
The primary audio system features Eastern Acoustic Works’ Digitally Steerable Array loudspeaker systems, employing two DSA 250 fullrange boxes and two DSA 230 LF-only boxes on either side of a main plasma display. Processing for the distributed system is built around four BIAMP® AudiaFLEX units. “The Audia is really the glue that brings the audio end together,” Clark says. “It provides literally all the signal and speaker processing-EQ compression, feedback suppression, delay-and allowed us to set up a series of profiles for use with the DSA speakers. The graphic interface on the Audia software is really refreshing. You can literally just draw what you want and let the computer do the work.”
Telex Safe-1000 wireless systems are supplemented by Shure MX-series podium mics with a Shure SCM268 auto mixer. Clark says the system allows two audio modes, depending on the need. “In one mode, the Shure automix runs through the Mackie 1604 mixer. In the other, the inputs are assigned to the auto mixers in the Audia,” he says.
The main video display, an existing rearprojection system, is located at the room’s focal point, visible from all three levels of the building. The projection system is augmented by a 61-inch NEC plasma unit, which performs as a confidence monitor for the presenter, as well as two supplemental Pioneer 50-inch plasmas.
A selection of eight Viewsonic VP230MB 19-inch monitors can be lowered from their perches in the ceiling via custom-built Inca motorized lifts. Two NEC 50-inch plasmas, primarily dedicated to digital signage, are located in the entryways. The system side of the video is all Extron, built around CVDA6MX distribution amplifiers and a Matrix 3200 routing switcher.
Crestron TPS-6000 and TPS-5000 series touchpanels are used for system control, with a selection of TPS-series video and data display modules as well. A Crestron Pro-2 series control processor runs the show, with a CP2E at an operator position for more I/O.
The Forum offers various means of connecting to the outside world, including streaming via a Polycom VS4000 codec and VBrick streaming encoders. Most of the Forum’s live events are offered on its website in Real Media format.
Along with the design challenges, the installation demanded flexibility from the HB crew as well. “We knew going in that we had a pretty aggressive schedule,” Hondzinski says. “The entire project had to be completed during the short summer break.”
Furthermore, it had to be completed while other renovations were being made. “It’s always a challenge coordinating with the various crews,” Hondzinski says.“We can’t open up a plasma while someone else is making sawdust. And there were several last-minute changes due to field conditions. Any time you open up the ceilings and walls in a 30- or 40-year-old building, you’re in for an adventure.”
Flexibility ruled, and the Forum’s reopening was on schedule. The renaming of the Forum to celebrate the late John F. Kennedy Jr. was marked with an emotional dedication ceremony presided over by Senator Ted Kennedy. The Forum is back in session.
A graduate of DeVry Institute of Technology, Doug has been in the Technology industry since 1976 and actively oversees Fearing’s daily operations. Along with his wife, Lois, and three others, Doug started Fearing’s in a 600 square-foot facility in Portage, Wisconsin. In the 25 years since, the company has grown to over 30 employees with offices in Madison and Milwaukee, Wisconsin. Doug likes to say he’s a “TV Technician with a dream� going back to his history with the family’s original business-Fearing’s TV and Appliance.
Doug values time with family, watersports, hiking, snowshoeing and skiing. In addition to being a devoted member of his church, Doug serves as Board President for Kinship Mentoring of Columbia County, Board member of Schools for Haiti and Scripture Chair of the Gideons-Portage camp.
A graduate of MATC, Lois oversees Fearing’s daily book keeping along with various HR responsibilities.
Along with Doug, Lois is deeply connected to community outreach, serving as a Board member and Fundraising Committee Chairperson for Kinship Mentoring of Columbia County. She also serves on the Schools for Haiti Fundraising committee. In addition, Lois’ ongoing passion and commitment to provide care for the elderly comes from her 10-year history of working in a Reedsburg, Wisconsin Nursing home.
Lois enjoys singing, hiking, sunny days on the pontoon, and spending time with her 4 grandchildren.
Ehren drives Fearing’s technology by continually seeking out trends to enhance capabilities while supporting Sales, Engineering and Installation teams. Throughout his years with Fearing’s, Ehren’s talent and vision have joined forces to create a wide variety of projects and strategic solutions that exceed expectation.
Ehren loves music, family time, movies, nature, sustainability efforts and electric vehicles.
With 10 years with Fearing’s and over twice that long in the industry, Ben continues to lead, coordinate, and develop the Commercial AV team.
By consistently delivering an outstanding experience and outcome, Ben contributes to the Fearing’s legacy of long-lasting partnerships that truly make a difference. Whatever the Commercial AV need may be, Ben and team deliver at the highest level.
Ben is an avid fisherman and photographer. He enjoys coaching his sons and other youth.
Chris has been with Fearing’s for 20 years and in the industry for over 2 decades. As a Certified leader in Sales Acceleration and trained in EOS (Entrepreneurial Operating Systems), Chris successfully utilizes his skills to lead the Fearing’s Salesforce. Chris and team are motivated and driven to develop new client partnerships while continuing to reinforce loyal long-term relationships with ongoing Service excellence.
Married for 19 years with 3 children, Chris enjoys skiing, hiking, fishing, boating, hunting, camping and golf. He’s also been actively involved as a Youth Football and Softball coach for his family and others.
